BIRKOSIT Dichtungskitt®

Resistant to heat and high pressure

 

A.I. Schulze
Chemotechnische Fabrik e.K.
Johannes-Robert-Becher-Str. 39
02827 GÖRLITZ
Germany
phone: +49 (0) 3581 750284
fax: +49 (0) 3581 750566
email: info@birkosit-dichtungskitt.com
web: www.birkosit-dichtungskitt.com

Withstands:

hot steam and air, hot and cold water, light fuel oils and lubricants, crude oil and natural gas at up to 900 °C.

The product can be subjected immediately to working loads. The hardening time of several hours allows butt joints to be properly bedded.

Adhesion guaranteed up to 250 bar
on plane sealing surfaces.

When used for "steam and gas turbines", we guarantee a service life of 10 years.

The pressure resistance for flanges without sealing rings is up to 450 bar, and even up to 550 bar for screw joints.

 

Sole manufacturer and Distributor A.I. Schulze

Chemotechnische Fabrik e.K.
A.I. Schulze
General Agency of A.I. Schulze
for marketing BIRKOSIT Dichtungskitt®, LINSEED OIL VARNISH
in Germany


A.I. Schulze
Chemotechnische Fabrik e.K.
Johannes-Robert-Becher-Str. 39
02827 GÖRLITZ - GERMANY

Storage Life Certificate

BIRKOSIT Dichtungskitt®

for maximum temperature and pressure resistance

Product number AIS B010

In addition to the product information in our product documents, the 2012 product specification sheet and the safety data sheet as per (EU) No 453/2010, we confirm the following additions for our customers:

Quality management

To ensure the high quality of our products and services and to continually improve our organisation, we regularly perform in-house audits to make sure that our company meets the requirements of the DIN EN ISO 9001 quality standard to which our company is certified.

Service life of the product BIRKOSIT Dichtungskitt®

BIRKOSIT Service life
When used in accordance with instructions and with regular servicing as required for steam and gas turbines, we guarantee a service life of 10 years for use on machined sealing surfaces (butt joints) with a finishing accuracy of Ra = 0.8 µm to 1.2 µm as well as incidences of shallow, trough-like corrosion or erosion defects at these sealing surfaces of ≤ 0.2 mm.
For high-pressure turbines (H), medium-pressure turbines (M) and low-pressure turbines (L) we guarantee that the product will withstand hot steam and hot air, hot and cold water, light fuel oils and lubricants as well as crude oil and natural gas up to 900 °C and withstand pressure up to 250 bar.

BIRKOSIT Service life data on the tin
The following information on the tin label of our products ensures reliable service life monitoring:
Filling date, unopened useable until, service life after opening, opened on
(the last detail is to be entered by qualified staff working for the customer)

BIRKOSIT Service life data in storage
Unopened tin
If stored correctly, we guarantee a service life of the product in the tin of 5 years.
Opened tins
If the tins are resealed correctly after partial use, we guarantee a service life of the product of 3 years.

BIRKOSIT Product use
After removal from the tin, we guarantee a product service life of 10 years for the product in use.
Storage life certificate as at 01.09.2012.

Görlitz, 01.09.2012
A.I. Schulze Chemotechnische Fabrik e.K.
Company Management
Dieter Bartkowiak


A.I. Schulze Johannes-Robert-Becher-Str. 39, 02827 GÖRLITZ, Germany
General Agency of A.I. Schulze Chemotechnische Fabrik e.K.

phone: +49 (0) 3581 750284
fax: +49 (0) 3581 750566
web: www.birkosit-dichtungskitt.com email: info@birkosit-dichtungskitt.com

 

Printable text version:
PDF Document